ADJUSTABLE SOLAR PANEL TILT MOUNT, 28″ WIDTH

Solar install went perfectly. Best investment anyone could make with today's rising prices! I'm producing 30+ kwh on sunny days and 10kwh on cloudy days.

Solar install went perfectly. Best investment anyone could make with today's rising prices! I'm producing 30+ kwh on sunny days and 10kwh on cloudy days.

Easy to follow instructions made mounting my 210w Newpowa solar panel to the brackets painless.
Now that that is over, let me tell you about their customer support.
I won’t describe my problem, I don’t want people to take advantage. Just know that I caused the issue. I did something stupid with BougeRV’s product. KAYLEE with their service department saved me. Even after I admitted to my mistake they went above and beyond to make sure I was taken care of. I wont hesitate to select BougeRV products above their competitors just because of they stand behind what they sell.

Quality product.
+
Stellar Support.
=
Happy Customer.

Thanks Kaylee!

Easy to follow instructions made mounting my 210w Newpowa solar panel to the brackets painless.
Now that that is over, let me tell you about their customer support.
I won’t describe my problem, I don’t want people to take advantage. Just know that I caused the issue. I did something stupid with BougeRV’s product. KAYLEE with their service department saved me. Even after I admitted to my mistake they went above and beyond to make sure I was taken care of. I wont hesitate to select BougeRV products above their competitors just because of they stand behind what they sell.

Quality product.
+
Stellar Support.
=
Happy Customer.

Thanks Kaylee!

I have seen many solar mounts on Amazon. I usually only use rail mounts but decided to give these a chance.
Upon opening the box, you get 4 rails with wholes and slots. There is also 2 cross rails that allow adjustment of angle. All necessary hardware is included. I upgraded 2 off the 3 plastic knobs to class 5 nuts and bolts for added stability.

Install is kinda difficult. These are being placed on top of a 40 ft high cube shipping container. They are aluminum and the container is steel so there is no way to weld. I first tried fully assembling the mount and panel. This did not work due to size of panel (265w) and angle. It was impossible to get self tapping screws in. So, I decided to take the bottom rail off and install first. Doing it this way required 2 helpers. One to hold panel at angle and another to help line up holes to reassemble due to the rails only going about 50 percent the length of the panel. This was my only complaint because it limits the amount of angle you can use. I was able to get a max angle of 29 degrees, but this is my yearly average angle.

After settling on the idea of self tapping screws (they come with). I bought some flexseal clear to make sure I would have no leaks.

During the installation, the winds in the mountains of Northern AZ picked up to gusts of 60mph. I thought for sure they would bend or break.

To my surprise they didn't even flex. I watched them through my window all day. The next day still perfect, but the one I couldn't mount and was on the ground still was coated in the sands from here.

Buy these if you have some help, once they are assembled, they are super solid. I am extremely happy with my purchase and know these mounts will last for years.

I have seen many solar mounts on Amazon. I usually only use rail mounts but decided to give these a chance.
Upon opening the box, you get 4 rails with wholes and slots. There is also 2 cross rails that allow adjustment of angle. All necessary hardware is included. I upgraded 2 off the 3 plastic knobs to class 5 nuts and bolts for added stability.

Install is kinda difficult. These are being placed on top of a 40 ft high cube shipping container. They are aluminum and the container is steel so there is no way to weld. I first tried fully assembling the mount and panel. This did not work due to size of panel (265w) and angle. It was impossible to get self tapping screws in. So, I decided to take the bottom rail off and install first. Doing it this way required 2 helpers. One to hold panel at angle and another to help line up holes to reassemble due to the rails only going about 50 percent the length of the panel. This was my only complaint because it limits the amount of angle you can use. I was able to get a max angle of 29 degrees, but this is my yearly average angle.

After settling on the idea of self tapping screws (they come with). I bought some flexseal clear to make sure I would have no leaks.

During the installation, the winds in the mountains of Northern AZ picked up to gusts of 60mph. I thought for sure they would bend or break.

To my surprise they didn't even flex. I watched them through my window all day. The next day still perfect, but the one I couldn't mount and was on the ground still was coated in the sands from here.

Buy these if you have some help, once they are assembled, they are super solid. I am extremely happy with my purchase and know these mounts will last for years.

I don't run across many 5 star products, but I have no reason to give less than that here.

Unlike the regular Z-style flush mounts, these have two little fingers that really hold the panel in place. Fit was universal, hardware was all included and installed easily, and I can't think of a single complaint. At $10 a panel, I don't think you can beat this kit.

I don't run across many 5 star products, but I have no reason to give less than that here.

Unlike the regular Z-style flush mounts, these have two little fingers that really hold the panel in place. Fit was universal, hardware was all included and installed easily, and I can't think of a single complaint. At $10 a panel, I don't think you can beat this kit.